Digital Camera / Webcam / Camcorder - Nikon Windows 7 driver download - Windows 7 Download
Windows 7 Nikon drivers download
Changes: - Fixed an issue that prevented additional deletions after multiple shots had been deleted in succession from a single burst of pictures. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The ...
Fixes: - Fixed an issue that prevented the camera correctly displaying location data acquired with GP-N100 GPS units. Notice: - Updating the firmware may reset the camera clock. - The clock can be set to the correct date and time using the Time zone and date option in the ...
Changes: - Fixed an issue that resulted in Auto power off not functioning as expected with DF-N1000 electronic viewfinders. Notice: - Updating the firmware may reset the camera clock. The clock can be set to the correct date and time using the Time zone and date option in Setup. ...
Changes:- The display when Home time zone or Travel destination is selected in the Set up > Time zone and date > Time zone sub-menu now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version: - Turn the camera on. - Press ...
Changes:- The display when Home time zone or Travel destination is selected in the Set up > Time zone and date > Time zone sub-menu now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version: - Turn the camera on. - Press ...
Changes:- Tapping particular areas of the display when attempting to select certain items in the Fn menu would cause the camera to stop responding. - Tapping to the right of 6400 when attempting to select a value for ISO sensitivity in the Fn menu would result in the camera exiting to ...
Changes: - Fixed an issue that in rare cases would prevent the camera turning on even when a battery with sufficient charge was inserted. - Updated some help text. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the ...
Changes: - Reduced the occurrence of an issue that in rare cases prevented the restoration of normal operation if the camera was restarted after the message “Turn the camera off and then on again” was displayed. - Improved the reliability of photo and movie transfer using the SnapBridge app. - ...
Changes:- The display when Home time zone or Travel destination is selected in the Set up > Time zone and date > Time zone sub-menu now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version: - Turn the camera on. - Press ...
Changes: - Fixed an issue that in certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu icons, ...
Changes: - Added support for the iOS version of SnapBridge. - Updated some help text. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu icons, then highlight Set ...
Changes:- The display when Home time zone or Travel destination is selected in the Set up > Time zone and date > Time zone sub-menu now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version: - Turn the camera on. - Press ...
Changes:- Changed the lens warning displayed when the camera is turned on. - Fixed an issue that caused a new folder to be created and file numbering to restart from DSCN0001.JPG when certain operations were performed. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera ...
Changes:- When users attempted to pair the camera with the smart device using the SnapBridge app under iOS 13, pairing would end in failure and a message to that effect would be displayed. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to ...
Changes from Firmware Version 1.0 to 1.1 - Improved the reliability of photo and movie transfer using the SnapBridge app. - Fixed an issue that sometimes resulted in location data added using the SnapBridge app not displaying correctly. - Fixed an issue that would in rare circumstances cause photographs to be ...
Changes: - Fixed an issue that resulted in unreliable connections between the camera and the iOS 10.2 version of the SnapBridge app. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left ...
Changes: - Fixed an issue that prevented the camera charging when connected to an AC charging adapter with Off selected for Charge by computer Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector ...
Changes:- Added support for SnapBridge version 1.2 and later. Fixed the following issues:- If a movie was recorded in “U (User settings) mode” with RAW + Fine or RAW + Normal for Image quality, the Image quality option stored using Save user settings would change to RAW. - If Save user ...
Changes:- When the battery was charged using the charging AC adapter, the charge lamp would not stop flashing when charging was complete. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to ...
Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...
Changes:- The display when Home time zone or Travel destination is selected in the Set up > Time zone and date > Time zone sub-menu now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version - Turn the camera on. - Press ...
Fixed issues: - Fixed an issue that sometimes resulted in the image in the monitor being out of focus when the camera was turned on. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the ...
Fixed issues: - Fixed an issue that resulted in the camera interfering with nearby radios and other devices, possibly producing audible noise, when connected to the EH-73P/EH-73PCH charging AC adapter via USB with the battery inserted and the power off. This issue does not occur when the EH-71P/EH-71PCH charging AC ...
Fixed issues: - Improved image quality during HDMI output. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu icons, then highlight Set up and press OK. - Highlight ...
Changes: - Fixed an issue that in rare cases caused one of several images after the first to be corrupted after a few hundred photos were taken with On selected for Points of interest (POI) > Display POI. Viewing the Camera Firmware Version: - Turn the camera on. ...
My Account
Help
Popular Drivers Tags
© 2024 Windows7Download.com - All logos, trademarks, art and other creative works are and remain copyright and property of their respective owners. Microsoft Windows is a registered trademarks of Microsoft Corporation. Microsoft Corporation in no way endorses or is affiliated with windows7download.com.